Toilet Flapper & Flush Valve Replacement Gold Coast

In modern Australian dual-flush toilets, the “flapper” is a flat rubber outlet washer located at the base of the flush valve tower. Over time, chemicals and tap water degrade this seal, causing a constant trickle into the bowl. We replace worn rings with heavy-duty, chemical-resistant silicone washers.

Complete Flush Valve Tower Replacement

If the internal housing, flush cable, or vertical mechanism of your dual-flush tower is cracked or jammed, replacing just the washer won’t fix the problem. We supply and install complete dual-flush valve assemblies calibrated for optimal water savings.

Older single-flush or imported toilet models use a hinged rubber flapper on a lift chain. When flappers harden, warp, or snap off their mounts, the toilet runs non-stop. We stock universal and heavy-duty flappers to restore a watertight seal instantly.

Dual-Flush Button & Cable Repairs

If pushing your flush button does nothing or feels sticky, the internal linkage, pneumatic tube, or flush cable between the button and valve may be broken. We repair or replace faulty push-button mechanisms for top-mount, side-mount, and wall-hung cisterns.

We carry genuine and OEM-compatible flush valve parts for all leading cistern manufacturers, including:

• Caroma (Invisi, Profile, Slimline, Trident)

• Stylus

• Dorf

• Fowler

• Seima

• Kohler

• Geberit (In-wall cistern systems)

• Novelli & Oliveri